Elementy tłoczników Sprężyny gazowe Ejectors filled with nitrogen gas
Ejectors filled with nitrogen gas
Ejectors EJ16 and EJ24
DAYTON‘s gas springs with male thread can be perfectly applied as ejector and replace classic spring plungers. Gas springs are not classified in different levels of spring force (colour marks) because the gas amount is filled individually. In use, the gas pressure may be adjusted from the bottom.
Dane techniczne
| filling agent: | nitrogen gas |
| maximum operation temperature: | 75° |
| maximum speed: | 0,8m/s |
|
||
| pass length up to 30 mm: | 180 passes/min. | |
| pass length 40 to 70 mm: | 120 passes/min. | |
| pass length 80 to 100 mm: | 80 passes/min. |
| spring dimensions: | M16 x 1,5 | M24 x 1,5 |
| minimum filling pressure: | 20 bar | 20 bar |
| maximum filling pressure: | 140 bar | 170 bar |
Formy standardowe
All springs have the same design features and are suitable for filling pressure between 20 and 140 bar (EJ16) resp. 170 bar (EJ24).
The ejectors of EJ type correspond to the guideline VDI 3004.