Střižné elementy Střižníky Střižníky s hlavou ISO 8020

Střižníky s hlavou ISO 8020

Head punches ISO 8020 from DAYTON are available with ejector pin (AJ_) and without ejector pin (AP_).

We etch all punches according to customers' wish.

DAYTON® JEKTOLE®, the punch version with ejector pin. During regrinding operation, the ejector pin is locked. Thus you do not lose time for disassembling the punch.
DAYTON® JEKTOLE® is patented under No. 2,917,960 und 3,255,654

DAYTON Keeper Keys are the perfect solution for regrinding.

 

Head Punches ISO 8020 - Characteristics and Benefits

Characteristics

Benefits

Punch head tempered

The reduction of the hardness in the punch head increases the overall load capacity of the punch.

Chamfer

Ensures that the head of the punch rests with positive locking in the counter bore of the retainer.

Radius

Reduces the notch effect on the head of the punch. R=0,3+0,2/-0

Etching

All punches are etched according to customer specifications.

Side vent hole (only in Jektole® punches)

Minimizes the suction at withdrawal that can cause slug pulling. In addition the side vent hole allows using the keeper key to lock the Jektole in the retracted position.  Thus it is possible to regrind the punch without disassembly and still ensure the correct length and function of the ejector pin. Maintenance and downtime are significantly reduced.

The „Keeper Key“ is available free of charge at DAYTON PROGRESS.

Lead chamfer

The shank diameter is lowered to facilitate perpendicular installation in the retainer.

Transition radius

Breaking off the punch is reduced by transition radius (13 mm).

Ejector Pin (Jektole®)

Jektole®, the spring-loaded ejector pin from Dayton reduces slug pulling in most cases. The diameters of the ejector pins are well chosen so that the stability of the punch is not compromised. The ejector pin allows the increase of the punch-to-die clearance, requires less press pressure, minimizes burr formation, and reduces the pressure required to strip the punch. The tool life is significantly increased and the overall punch costs are reduced.

Grinded surface

All DAYTON punches have a surface roughness of 4µm on the punch point, which significantly increases the tool life.

Tolerance and concentricity

DAYTON punches are ground to the following tolerances at the punch point.

 

 

Press Fit / ISO 8020

Versatile

Shank tolerance

M5

M4

Round punch

0/+0,01mm

0/+0,005mm

Concentricity

Ø 0,01mm

Ø 0,008mm

Shaped punch

+/-0,01mm

0/+0,005mm

Geometrical tolerance

0,02mm

0,008mm

 

Technické údaje

Material HRC
A2 (HWS) 60-63
M2 (HSS) 60-63
PS (PS4) 63-65
Head 40-55
  • Tolerance und Precision of concentricity
  • Shank tolerance m5
  • round punch 0/+0,01mm
  • Rundlauf Ø0,01mm
  • shaped punch +/-0,01mm
  • shaped punch

 

AJ_ with ejector pin
AP_ without ejector pin

Standardní tvary

  • AJX/APX
  • AJO/APO
  • AJR/APR
  • AJK/APK
  • AJL/APL
  • AJH/APH
  • AJJ/APJ
  • AJN/APN
  • AJV/APV
  • AJY/APY
  • AJZ/APZ

Příklad objednání

  • Type
  • Body & Length Codes
  • P or P & W Dimensions
  • Steel
  • Standard Alterations